UV LED有什么优势？
答:与传统的管型光源相比，Uv led固化机具有节能环保、成本低、寿命长、操作简单等优点。
2.UV LED有哪些波长？
回答:UVLED就是紫外线。正常波长为365纳米、385纳米、395纳米、400纳米、405纳米。
3.关于设备价格？
答:决定设备价格的因素有光源面积、光功率、波长、材料、加工工艺等。辐射器的。
4.光源区？
答:光源区有一些固定的大小，100 * 100，20 * 20，20 * 40，30 * 30等。其他区域可以定制
5.光照强度？
答:365nm有400mw，800m，1000mw，395有500mw和800mw，也可以根据客户要求定制。
6.光线均匀性？
答:光的均匀度可以达到90%以上。
7.光温？
答:led是冷光源，没有热辐射，短时间内不会有温度。
8.有什么监控系统？
答:有热报警、断路报警、缺光报警、单灯故障报警。
9.UV led寿命？
答:产品设计很优秀。在正确使用下，可以达到20000小时以上。
10.启动时间？
回答:开机即用，无需等待。
11.对人体有害吗？
回答:长时间暴露在紫外线下是有害的。使用时建议避光。
12.这台机器有多重？
答:100 * 100的标准灯座大概2公斤。定制设计将以实际设计为基础。
13.如何安装？
答:灯头上有一个固定孔。请按照安装说明进行操作。
14.使用环境？
回答:建议在空调房使用，灰尘少。详情请参考我们的手册。
15.功耗怎么样？
答:取决于光源的面积和灯珠的数量。比如100 * 100的56个灯，大概是250w。
16.系统稳定吗
答:我们采用恒流驱动，加上特殊处理，使用过程中光输出非常稳定。
17.灯珠是什么牌子？
答:全部采用韩国首尔uv led，质量保证。
18.出货时间是多长时间？
答:标准产品10天左右，2-3周内可以完成订单。
19.光衰减怎么样？
回答:环境不错。在正确使用下，光衰很慢。一般10000小时后，光功率可以保持在90%以上。
20.照射距离？
答:大角度灯珠最好在10mm左右的距离，小角度20-30mm即可。
21.噪音？
回答:一般光源会控制在50 dB左右。特殊要求可以60左右。
22.与其他公司相比，你们的设备有什么优势？
答:我们的设备更精细，我们的信誉也很好。我们不喜欢评价同行的设备。
23.保修政策？
回答:非人为损坏，保修一年。
24.如何处理损坏的设备？
答:双方已协商好修复方法，并以最快速度完成。
25.怎么保养？
你需要做一些清洁工作。详情请参考我们的说明书。
26.推荐功率多大？
回答:建议电源开至80%。留点余地。如果以后有衰减，可以调整。
27.辐照有效面积？
答:一般如果是100 * 100的出光面，相对均匀的面积大概是95 * 95。
28.灯珠功率是多少？
答:单个灯珠功率3.7w。
29. Has it been a producer or a trader for a long time?
Answer: Our products are independently developed, produced and sold.
31.什么时候成立的？
答:公司分为深圳总部和华东运营中心(杭州)。
31.什么时候成立的？
答:2009年成立。
32. How many years have I been in business?
Answer: The founder has 9 years of experience in the industry and is the earliest in China to engage in this industry.
33. What typical customers have you done?
Answer: Foxconn, Huawei, China Unicom, Xintai Optics, Dongju Electronics, etc.
34. Cooling method?
A: Our main fan cooling is simple, durable. Problems can be found in time, and water or air cooling can be used according to customer needs.
35. Time setting method?
Answer: It can count down. The timing unit can reach 0.1 seconds and it can be always on.
36. Input voltage?
Answer: Normally it is 220v. If you have special needs, you can also support 110v.
37. Would you like to connect an external ventilation device?
Answer: No external ventilation device is needed because ozone is not generated.
38. What are the forms?
Answer: Can support oven, conveyor.
39. Can you foot switch?
Answer: You can connect the foot switch.
40. How much does it affect the exposure distance?
Answer: UV is more sensitive to distance, and distance has a greater impact on light intensity. It is recommended to use a suitable irradiation distance.
41. Is it always on?
Answer: It can support constant light, because our drivers and heat dissipation can ensure the long-term operation of the light source.
42. How long does it take to cure the glue?
Answer: Under normal circumstances, it can be completed within 10s, and the special one may take a little longer.
43. What is the difference between 395 and 365?
Answer: 365nm is the most commonly used wavelength for curing glue, but some need to pass through a layer of material or a colored adhesive, 395 is more suitable. The longer the wavelength, the better the transmission power.
44, does the UV LED have an odor?
Answer: UV LED does not produce ozone and has no odor; the tube type produces ozone, so it has odor.
45. Payment method?
A: Advance payment. After receiving the goods, the inspection is qualified and the full payment is paid.
46. What industries are mainly used for?
Answer: It is mainly used in optical electronic display, electro-acoustic, etc.
47. The curing range?
Answer: UV glue, UV ink, UV paint, etc.
48. Can it be installed on their existing machines?
Answer: UV led devices are relatively small and can generally be installed on other devices.
49. Principle of glue curing?
Answer: Under UV light irradiation, UV glue will undergo cross-linking reaction and polymerize from monomer to macromolecule.
50. Is the replacement part expensive?
Answer: The semiconductor market is changing rapidly. This can only be marketed with the market, but the general trend is that it is getting cheaper.
中文
英文